Corum LAB 02 Skeleton Watch With Flying Gear Train

The Corum LAB 02 Skeleton watch is equipped with an exclusively designed flying gear train complex structure. The top of the movement adopts a bridgeless design, and the entire gear train structure seems to be suspended in the center of the case out of thin air. The diameter of the case reaches 45 mm and the thickness is 13.4 mm. The bottom and middle case are made of transparent sapphire glass, allowing the wearer to appreciate the special structure of the movement from multiple angles. The power reserve indicator is located at 8 o'clock on the side and you can see the movement of the red arrow while winding. The clockwork barrel is at 12 o'clock on the dial, the calendar dial is at 4 o'clock, and the top of the flying tourbillon frame at 6 o'clock is decorated with a "key" logo.

Corum removed the top plywood bridge and used long and narrow shaft bars to secure the gear train. The ruby bearings were replaced by ball bearings to improve the strength and stability of the overall structure. The bottom plate is also highly hollowed out and installed on a transparent sapphire disk to achieve a floating flying gear train effect.

CO 300 manual winding movement, swing frequency 21600 vph, power reserve 55 hours. The development of this movement took 2 years and contains 416 components, which were completely hand-polished and assembled by watchmakers. LAB 02 is available in a limited edition of 10 pieces, available in rose gold or white gold, or in a custom-made diamond case. Best luxury clone watches online, buy replica watches at firstwatchclone.co.